LED post lighting for outdoor areas without electricity
This LED post lighting with a solar panel is an ideal solution for illuminating outdoor areas where electrical power is not available. It is perfect, for example, for parking spaces, garden paths, backyards, or entrance gates. Thanks to the integrated light and motion sensor, the light automatically turns on when motion is detected in low light, ensuring safe movement even at night. The optional color temperature of 3000 K provides a pleasant warm white light that does not disturb the atmosphere of the garden or the surroundings of the house. Installation is very flexible – the post can be fixed into the lawn using two stakes or attached to a solid surface with screws or bolts.

Practical features and worry-free operation
The lighting offers two automatically preset lighting modes, which can be easily switched using the switch. The first mode activates the light at 100% power for 30 seconds when motion is detected, the second mode switches to about 10% power after turning on for gentle orientation lighting. The solar panel with a power of 1.9 W ensures the battery is charged in about 8 hours of sunlight, with a net lighting time of at least 1 hour (for example, 120 activations of 30 seconds each). In case of insufficient sunlight, the light can be recharged via a USB-C connector. The sensor with a detection angle of 120° and a range of up to 7 m reliably responds to movement, IP54 protection ensures resistance to weather conditions, and the elegant black design fits into any exterior.

• LED pole lighting with solar panel and light and motion sensor
• suitable for lighting outdoor parts of spaces without electricity supply (parking spaces, garden walkways, backyards, entrance gates, etc.)
• power consumption: 5W
• luminous flux: 400lm
• selectable color temperature: 3000K (warm white)
• the post can be fixed in the lawn with 2 pegs, or fixed to a flat surface with screws or screws
• automatically preset 2 lighting modes
• lighting modes:
• 1. 100% lm for 25s when motion is detected then goes off
• 2. 100% lm for 25s when motion is detected then goes to 10% lm
• sensor detection angle: 120°
• detection distance: max 7m
• battery charging time with solar panel: approx. 8 hours (depending on lighting conditions)
• net lighting time: nim. 1 hour (e.g. 120 switches when lighting for 30 seconds)
• battery: Li-Ion 3.7V 2000mAh
• solar panel: 1.9W, 5V
• dimensions: 12 x 11.4 x 50 cm
• switch: off (OFF) / on (ON); mode I / mode II
• USB C connector for recharging the lamp in case of lack of sunlight
• degree of protection: IP54
• black colour