The practical LED solar wall light with integrated motion and light sensor is ideal for lighting outdoor areas without electricity. It provides a warm white light (3000K) with a luminous flux of 400 lm and has two automatic modes - short intense illumination when motion is detected or a combination of detection with continuous low light after switching off.

The 1.9W solar panel ensures that the built-in Li-Ion battery (3.7V / 2000mAh) is charged in about 8 hours of sunlight. In case of lack of sunlight, the light can be recharged via USB-C connector. With a detection angle of 120° and a range of up to 7 m, the lighting is very effective. The IP54 rating protects it against moisture and dust, and the dimensions of 12 × 11.4 × 8 cm make it easy to install even in tight spaces. Suitable e.g. over a gate, pergola or garden shed.

• LED wall lighting with solar panel and light and motion sensor
• suitable for lighting outdoor parts of spaces without electricity supply (parking spaces, pergolas, sheds, backyards, entrance gates, etc.)
• power consumption: 5W
• luminous flux: 400lm
• selectable color temperature: 3000K (warm white)
• automatically preset 2 lighting modes
• lighting modes:
1. 100% lm for 25s when motion is detected then goes off 2. 100% lm for 25s when motion is detected then goes to 10% lm
• sensor detection angle: 120°
• detection distance: max 7m
• battery charging time with solar panel: approx. 8 hours (depending on lighting conditions)
• lighting time: nim. 1 hour (e.g. 120 switches when lighting for 30 seconds)
• battery: Li-Ion 3.7V 2000mAh
• solar panel: 1.9W, 5V
• dimensions: 12 x 11.4 x 8 cm
• switch: off (OFF) / on (ON); mode I / mode II
• USB C connector for recharging the lamp in case of lack of sunlight
• degree of protection: IP54
• black colour